Every parent needs a stash of crayons to help a little one stay busy. This crayon roll is a fun way to keep track of crayons and have them readily accessible. I’ve included easy-to-follow instructions to make this DIY craft super simple, and it is cute enough to give as a gift!

open crayon roll and closed crayon roll on black background
Crayon Roll

RELATED: These fabric roll organizers work great to hold other things too. Make the pockets more narrow on the make-up brush holder to hold colored pencils or markers.

To welcome my new niece home from China on Sunday, I whipped up a crayon roll. I wasn’t able to give it to her in person but my mom said she was mesmerized by all of the crayons and how they slip into their own pocket.

child with crayon roll

Here are the supplies you’ll need

  • Two pieces of fabric 5 X 16 1/2 inches (for the outside and inside)
  • One 6 X 16 1/2 inch piece of fabric folded in half lengthwise and pressed (for the pocket)
  • One piece of lightweight fusible interfacing 5 X 16 1/2 inches
  • One package of ric rac trim
  • 30 inches of ribbon
  • One package of 16-count crayons

TIP: A rotary cutter, ruler and mat make it really easy to cut out these pieces. I love this folding cutting mat that also serves as an ironing board. (affiliate links)

four fabric pieces

How to Make a Crayon Roll in Five Easy Steps

Step One: Iron the interfacing to the wrong side of the 5 X 16 1/2 piece of fabric that you want to be on the inside.

fabric and interfacing

Step Two: Line up the bottom edges of the folded piece and the piece with interfacing and then pin them together. Starting over from the edge 1 1/4 inches sew lines parallel with the edge starting from the top of the crayon pocket, back-stitching at the top to reinforce. Sew the lines one inch apart across the pocket. You will have 1 1/4 inches on each side.

exterior fabric piece with pocket piece on top

Step Three: If you want to use ric rac, pin it around the edge as shown. Fold the ribbon in half and pin it on the edge.

Note: On the one, I didn’t use ric rac I did a blanket stitch around the edge when finished.

fabric pieces for crayon roll stacked with trim and tie inside ready to be sewn

Step Four: Pin the remaining piece of 5 X 16 1/2 inch fabric right sides together with the pocket piece. Sew around edges with 1/4 inch seam. Leave about 3 inches across the bottom for turning.

sew around outside edge

Step Five: Trim corners, turn, press and topstitch being careful to catch all layers of the opening to close.

open crayon roll with crayons placed in each pocket
closed crayon roll and open crayon roll on black background

Welcome home Faith! We are so happy to have you join our family! How very lucky we are indeed to have you! Do you have a special child in your life that would love to have a fun way to hold their crayons?

Crayon Roll Variations To Try

Looking for a simpler version?  Try this felt holder. It has a lot less sewing and whips up even quicker!

purple felt crayon roll rolled up

Check out this new closure for the fabric roll

crayon with plastic sliding closure

More fun crayon crafts

I think that you like these additional crafts. Your kids will love using up their broken crayons to make fun new shapes, and the felt turkey holder and egg holder is perfect for your holiday kid’s table!

I would love to keep you fully stocked with creative ideas, yummy recipes, fun crafts, and loads of free printables. Subscribe to Skip to my Lou to get new ideas delivered to your inbox. Follow me on Facebook, Pinterest, Twitter, and Instagram for all my latest updates.

How to Make a Crayon Roll Crayon Holder

This easy to sew crayon roll is a fun way to keep track of crayons and have them readily accessible. This step-by-step sewing guide will show you how simple it is.
Author Cindy Hopper

Equipment

  • Pair of Scissors
  • Iron

Ingredients

  • Two pieces of fabric 5 X 16 1/2 inches for the outside and inside
  • One 6 X 16 1/2 inch piece of fabric folded in half lengthwise and pressed for the pocket
  • One piece of lightweight fusible interfacing 5 X 16 1/2 inches
  • One package of ric rac trim
  • 30 inches of ribbon
  • One package of 16 count crayons

Instructions

  • Iron the interfacing to the wrong side of the 5 X 16 1/2 piece of fabric that you want to be on the inside.
  • Line up the bottom edges of the folded piece and the piece with interfacing and then pin together. Starting over from the edge 1 1/4 inches sew lines parallel with the edge starting from the top of the crayon pocket, back-stitching at the top to reinforce. Sew the lines one inch apart across the pocket. You will have 1 1/4 inches on each side.
  • If you want to use ric rac, pin it around the edge as shown. Fold the ribbon in half and pin it on the edge. Note: On the one, I didn't use ric rac I did a blanket stitch around the edge when finished.
  • Pin the remaining piece of 5 X 16 1/2 inch fabric right sides together with the pocket piece. Sew around edges with 1/4 inch seam. Leave about 3 inches across the bottom for turning.
  • Trim corners, turn, press and topstitch being careful to catch all layers of the opening to close
  • TIP: A rotary cutterruler and mat make it really easy to cut out these pieces. I love this folding cutting mat that also serves as an ironing board. (affiliate links)

About Cindy Hopper

Learn More

you may also like

Comments

  1. Good Idea, for sure! How about using a 1/2″ band with velcro on it at one end, so that when you roll it up the two pieces of velcro hold it shut. That way, the little critter could even tidy up by themselves, maybe. 🙂

  2. I love this idea. I found your link on 30 handmade days. Thank you so much for sharing.

  3. I was visiting my sister-in-law Danielle Wynn and she had these. I loved them so I’m going to make some for my kids. THANKS for sharing the info.

  4. What a cutie your new niece is!!!
    Love this idea of yours!!
    I can see it being used for other things as well!!
    Thanks for a great tut!

  5. Thanks for the tutorial!! I just made this for a friend’s son’s birthday today. Took a little bit…but the next one I know will be faster since I won’t have to keep making sure I am doing things right. Silly me pinned the ribbon in wrong, so I had to sew it onto the outside by hand (ooops!) I will be making these for all of my nephews and nieces and friend’s kids. Thanks again 🙂

  6. Thanks so much for the tutorial! The idea is absolutely adorable! I think I want to make one for my new cousin. She’s four, and I think she’d be able to appreciate it 🙂

  7. thank you so much! i wanted to make a crayon roll for my daughter’s third birthday, but didn’t want to figure out the measurements and such, this tutorial was a big help! i’m sure she’ll love it!

  8. Thank you so much for this tutorial 🙂
    I was going crazy trying to figure out how to make a neat roll for my paintbrushes.

    Thank you!!! <3

  9. Thanks! I have been making these w/o a pattern and I never liked them. I used your tutorial to make a couple for a friend and I LOVE how they turned out. I did 5×8.5 for roll-ups holding only 8 crayons.

    Again, thanks for posting.

  10. Thanks for the tutorial! I made one for my son…denim, red gingham, and khaki.

  11. What a beautiful girl Faith is, i m sure she wil bring lot of joy and love to the family.

    Thanks for the tutorial, i think i will try to make a crochet bag with it.

Leave a Reply

Your email address will not be published. Required fields are marked *

Recipe Rating