Altered Clipboards, is a quick and simple gift that is also inexpensive. It would be easy to make a lot of these gifts assembly style.

Clipboard with a flower background on the board and notepaper clipped on the front.
Flowers Pop on a DIY Clipboard

Items I used for the Clipboards

I used small 6″ X 9″ clipboards found at OfficeMax ($1.69). The notepads are 5″ X 8″ 50 sheet Jr. size writing pads, found at Walmart (6 notepads were only $2.50).

I tried these two ways:

Using Elmer’s Spray Adhesive and Krylon Matt Finish

Spray Adhesive Craft Bond by Elmer's and Matte Finish by Krylon spray bottle

and using Mod Podge Paper Matte

Bottle of Plaid paper Mod Podge Matte finish acid free water based sealer

Starting the Project

  • First cut decorative paper to fit the clipboard.  For my 6″ X 9″ clipboards it worked perfectly.  I took the extra time to make a template that fits around the top of the clip (a little bit of a pain).  I have also seen where there is just a rectangle shape cut to fit around the clip. My paper looked like this.
Cute paper with a black background with outlined colored circles cut with a notch in the top to glue on top of the clipboard.
  • Paint the back of the paper with Mod Podge Paper (Matte) or spray with Elmer’s Spray Adhesive. If you are using spray adhesive also spray the clipboard. Cover the clip with masking tape to keep it clean. Pay special attention to make sure whichever method is used that the edges of the paper are completely covered
  • Working quickly, place the paper onto the clipboard. This is a bit tricky. It is okay to lift up and reposition until it matches all of the edges properly. Be careful not to stretch the paper.
  • Smooth paper and make sure the entire piece of paper is secured.  When I had a spot along the edge that didn’t adhere, I lifted it slightly and added more glue. 
  • Allow it to dry for at least 15 minutes before putting on the top coat.
  • Round off corners with scissors.
Finish DIY clipboard. The paper has been clued on. It is really cute with the colorful paper.
  • Give the top of the paper a light coat of Mod Podge Paper in matte or two coats of spray matte finish.  I have to say I like the paper feel and look so I prefer the Krylon spray matte finish. No matter which technique you use you must let each layer of glue dry. The Modge Podge will be a more durable surface.
  • Glue a matching piece of decorative paper to the top of the notepad. Any glue will do.
A matching strip of paper is glued to the top of the notebook paper pad.

For an Extra Touch!

To give the clipboard an extra nice touch I added a metal label holder. I taped them on with a piece of clear tape exactly where I wanted them and then my husband drilled holes in the metal clip so they could be attached with the brads included in the package.

I painted the metal holders and brads with gloss paint.  Open the clip as far as you can so you can attach the metal label holder and spread the brads apart on the back side of the clip.

A bottle of outdoor/indoor gloss acrylic paint and a label holder where one has been painted pink including the screws.
Photo of the completed clipboard with the label holder attached.
Two completed clipboards one with a green label holder and one with a pink label holder.

Finished! I think I will put the recipient’s name in the label holders.

More DIY Projects

I would love to keep you fully stocked with creative ideas, yummy recipes, fun crafts, and loads of free printables. Subscribe to Skip to my Lou to get new ideas delivered to your inbox. Follow me on Facebook, Pinterest, Twitter, and Instagram for all my latest updates.


About Cindy Hopper

Learn More

you may also like

Comments

  1. Love the idea!!! Going to have a holiday craft party. This will be one of the crafts for it! Its great for mother daughter. any ideas for other crafts?!?!!?

Leave a Reply

Your email address will not be published. Required fields are marked *