Welcome to Skip to my Lou

As seen in the new book "Hand in Hand"

DIY Scarf Hanger

· 9 Comments

This DIY scarf hanger is the perfect organization solution for all your scarves! So if one of your New Year’s Resolutions was to get organized here is a simple DIY project.

DIY Scarf Hanger

All you need is a jig saw or band saw, a piece of 3/8″ masonite, a 1.5 inch hole saw, paint and paint brush.

DIY Scarf Hanger Template

 

Download the template, print (with no scaling) and fasten the three pages together.

Next cut out the hanger shape from the paper. Lay it on the masonite and draw around. With a tac or sharp object mark the center of each hole, piercing through the paper and into the masonite.

 

scarf hanger 1

Cut out the hanger shape using a jig or band saw. Next cut out the holes. To get a smooth cut, place the masonite on a piece of scrap lumber and drill through the masonite and just into the scrap.

scarf hanger 2

Lightly sand the edges with fine sandpaper.

scarf hanger 3

Wipe of any dust and then paint with acrylic paint. Give two or three coats, drying and lightly sanding between each coat.

scarf hanger 4

Now you are ready to hang your new scarf hanger in your closet and beautifully arrange your scarves!

Wooden Scarf Hanger

Lowe’s is the perfect place to find supplies so you can organize your life! For great ideas and loads of inspiration sign up for their FREE Creative Ideas Magazine.  You can also follow  Lowe’s on Facebook for more ideas.

LOWES-Creative-Magcollage1[1]

Thanks Lowe’s with providing with a gift card to purchase my supplies!

 

LoadingUpdating...

9 Responses to “DIY Scarf Hanger”

Leave a Reply

Please note: Comments may not appear immediately.

© 2009 - 2014 Skip to my Lou