Welcome to Skip to my Lou

As seen in the new book "Hand in Hand"

How to build a simple scarecrow

Supplies for a scarecrow

1 – 2″ x 3″ x 8′ board  (cut off 16 inches)
All purpose burlap (3′ x 8′)
1 – 1/2″ x 36″ oak dowel rod
raffia
drill with 1/2″ drill bit
knife for carving pumpkin
pumpkin

We found everything, even the pumpkin at Lowe’s! ( I already had raffia at home)

Cut an 8′ piece of burlap and fold in half. Sew along each side, allowing about 8 inches open at the top fold on each side.

Measure pumpkin height and subtract 2 inches. Ours was 12 inches so we measured down 10 inches on our board and drilled a hole for the dowel rod to slip through.

Place burlap over the frame, make a slit in the center of the fold for the board to slip through. Tie raffia on each end of dowel and around the ‘waist’ of the scarecrow.

Cut a small hole in the bottom of the pumpkin to remove the insides and carve away!

We even drilled a hold in the board for a battery operated tea light to fit. Place pumpkin on board.

A fabulous scarecrow at day or night!

You can find Lowe’s Creative Ideas on Facebook and be inspired by the Lowe’s Creative Ideas blog.

Don’t forget to pick up a FREE Subscription to Lowe’s Creative Ideas Magazine:

 Or, now available for the iPad, the FREE Lowe’s Creative Ideas App gives you full access to the most recent magazine issues. Get all the exciting project ideas, helpful videos and loads of bonus content wherever you go!

Exclusive Reader Giveaway

Win a $100 Lowes Gift Card!! Be sure to wait for Rafflecopter to load and enter there.

a Rafflecopter giveaway

Disclosure, Lowe’s provided me with a gift card for supplies, the thoughts, opinions and ideas are all mine! I really do love Lowe’s!

LoadingUpdating...

Comments

Leave a Reply

Please note: Comments may not appear immediately.

© 2009 - 2014 Skip to my Lou